Konunuz Forum Kurallarını ihlal ettiğinden dolayı kilitlenip çöpe atılmıştır.
Galvanized steel towers introduction
1. The appearance of the electric galvanized steel towers is beautiful. Because of its compact structure and beautiful image, the electric power steel rod can basically meet the aesthetic requirements.
2, galvanized steel towers construction is simple and quick. Power steel pole construction basically does not need to set up the process, only need to install the power steel pole after the completion of the whole group immediately, the construction speed is much faster than the tower construction, so the use of power steel pole can greatly improve the construction efficiency and shorten the construction period.
3. The material of steel bar is not easy to be stolen. Because the electric power steel pole is made of integral insertion or flange connection, the phenomenon of missing parts is basically eliminated, the hidden danger of accidents is reduced, and the line health level is improved.
4. How to remove rust from electric steel poles
Coating rust prevention is a common and commonly used method to solve the problem of rust prevention for electric steel poles. There is also hot galvanizing, which can last for 20 years or even longer.
Product parameters
HeightFrom 8 meter to 55 meter
Suit forElectric Power Transmission and Distribution
ShapePolygonal or Conical
MaterialNormally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²
Q235B/A36, Minimum Yield Strength ≥ 235 N/mm²
As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400
Power Capacity10kV to 500kV
Tolerance of the dimensionAccording to client’s requirement.
Surface treatmentHot dip galvanized Following ASTM A 123, or any other standard by client required.
Joint of PolesSlip joint, flanged connected
StandardISO 9001:2008
Length of per sectionWithin 14 meter once forming
Welding StandardAWS (American Welding Society ) D 1.1
Thickness1 mm to 36mm
Production ProcessRaw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages
PackagesPacking with plastic paper or according to client’s request.
Our Advantages
Our well-equipped facilities and excellentquality control throughout all stages ofproduction enables us to guarantee total customer satisfaction.
Exclusive and unique solution can beprovided to our customer by our well-trained and professional engineersand staff.
Professional factory: We are manufacturer, specializing in producingall kinds of steel poles or steel tower formorethan 20 years, competitive with goodquantity.Customized Transmission Tower
website:http://www.futaometal.com/transmission-tower/
1. The appearance of the electric galvanized steel towers is beautiful. Because of its compact structure and beautiful image, the electric power steel rod can basically meet the aesthetic requirements.
2, galvanized steel towers construction is simple and quick. Power steel pole construction basically does not need to set up the process, only need to install the power steel pole after the completion of the whole group immediately, the construction speed is much faster than the tower construction, so the use of power steel pole can greatly improve the construction efficiency and shorten the construction period.
3. The material of steel bar is not easy to be stolen. Because the electric power steel pole is made of integral insertion or flange connection, the phenomenon of missing parts is basically eliminated, the hidden danger of accidents is reduced, and the line health level is improved.
4. How to remove rust from electric steel poles
Coating rust prevention is a common and commonly used method to solve the problem of rust prevention for electric steel poles. There is also hot galvanizing, which can last for 20 years or even longer.
Product parameters
HeightFrom 8 meter to 55 meter
Suit forElectric Power Transmission and Distribution
ShapePolygonal or Conical
MaterialNormally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²
Q235B/A36, Minimum Yield Strength ≥ 235 N/mm²
As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400
Power Capacity10kV to 500kV
Tolerance of the dimensionAccording to client’s requirement.
Surface treatmentHot dip galvanized Following ASTM A 123, or any other standard by client required.
Joint of PolesSlip joint, flanged connected
StandardISO 9001:2008
Length of per sectionWithin 14 meter once forming
Welding StandardAWS (American Welding Society ) D 1.1
Thickness1 mm to 36mm
Production ProcessRaw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages
PackagesPacking with plastic paper or according to client’s request.
Our Advantages
Our well-equipped facilities and excellentquality control throughout all stages ofproduction enables us to guarantee total customer satisfaction.
Exclusive and unique solution can beprovided to our customer by our well-trained and professional engineersand staff.
Professional factory: We are manufacturer, specializing in producingall kinds of steel poles or steel tower formorethan 20 years, competitive with goodquantity.Customized Transmission Tower
website:http://www.futaometal.com/transmission-tower/
